Serman & Tipsmark A/S

At Serman & Tipsmark, we are sometimes given larger projects – as when we recently developed and delivered a large, complex robotic test system.

Fully automatic module tester
The test system is a fully automatic module tester for a larger Danish customer, used for fully automatic testing of the customer’s ready-assembled module units – without any form of manual handling. The test system can handle 50 module variants. Specifically, it tests for pressure loss for flow with up to 15 L/min and for leakage down to 5 ml/min.

The testing time is considerably shortened because the robot does the job and feeds the system. The robot also makes the test more specific because the same motions are repeated. On a screen, the customer can follow the process of the test and make sure that everything is OK. In that way, you can keep track to see if the module is approved or has any errors. In case the system finds errors on a module, it is placed on a special conveyor belt. In the back of the test system, there is easy access to valves, meters, pumps and filters. All of the test system’s electrical installations are combined in one special cabinet as seen in the video below.

Large experience leads to larger jobs
It is far from the first time we, at Serman & Tipsmark, have developed and delivered a test system om the caliber. We have long tradition of advanced systems and have the right competencies to build them. That is also one of the reasons why the customer chose us for the job.

Read the news on our website where you can also watch a video of the test system. In this you can see how it works and what it does.

 

We have always taken pride in supplying the best possible service to our customers – and that pays off. We have a customers who came all the way from Silkeborg to Brønderslev because of the great service we have to offer.

The customer had been looking a valve, but he didn’t know which one he needed or how to mount it for that matter. Every company he had asked couldn’t sell him a valve – unless he could specify the exact type of valve he needed. Moreover, they couldn’t help him mount the valve either.

That was only until he spoke to us at Serman & Tipsmark. Here, the customer quickly discovered that we could guide him in what valve he needed. On top of that, we would also mount it for him. Therefore, he drove all the way from Silkeborg to the office in Brønderslev because we could offer him the service he needed.

To us, meeting the customer in his court and accommodate his needs = good customer service. We are very happy to stand out from the crowd – both in terms of our service and products. This way we can create the little sunshine stories that we live on.  

In the future, when we're driving around Denmark all our customers, you will see us in our nice, new Serman & Tipsmark cars. The new cars have gotten an upgrade in the logo, so now you will know what to look for.

To us, it is a virtue that our customers get the best solutions – whether it’s service or products and regardless if it comes directly from us or one of our suppliers. Regardless the situation, we always work in a solution-oriented manner. That is also one of the reasons that we collaborate with ep tools.

Ep tools is a Danish company that – among other things – produces custom-built generators, light towers, lifting equipment and torque tools for the off-shore marine-, steel- and machinery and plant industries. On the market, it is also known for delivering complete solutions for e.g. the wind industry. And last but not least, it sells the S&T highpressure powerpack products in Denmark. ‘ S&T highpressure powerpacks’ is what we, at Serman & Tipsmark, used to call highpressure powerpacks.

At Serman & Tipsmark, we are working on streamlining our product line to ensure that we deliver the best quality in highpressure pumps on a global scale. Furthermore, we are working on developing our global supplier network and by doing so, reaching even more customers through skilled suppliers. It is due to the more global focus that we are changing the product name on our highpressure powerpacks and calling it S&T highpressure powerpacks instead.
 
We know that the transition from direct sales to distributor sales can be a mouthful to handle. But we believe that when we let specialists – who are in daily contact with the customers – handle the sales work, it will result in optimal feedback and thus we can continually improve our business and supply the best products available.
For inquiries in Denmark please contact:
 
ep tools A/S
 
Contact person:
Henrik Madsen
+45 40355685
hm@eptools.dk
 
As always, you are very welcome to contact us for more information.
 

Serman & Tipsmark is currently building a very large test panel. Actually, we have now built the frame for what is going to be the largest test panel we have ever produced – and also the largest individual unit we have built.

When we reach such milestones, we want to mark it. So when our smith Jeppe was done welding the frame, he invited everyone at S&T Brønderslev to a topping-out ceremony in the shop. It was a nice afternoon where our service assistant Britta had made a delicious cake, and everyone got to see what we can do in the shop. It was a proud moment for all in Serman & Tipsmark.

The frame itself is 3 x 4 x 2 metres, and it is now ready for the remaining process. First, we put tanks on it. Then, the test panel is ready for our painter. Lastly, it is sent to the hydraulic assembly in the shop – and then the test panel is ready.

As soon as the test panel has gone through the remaining process, it is ready to be delivered to a larger Danish industrial customer.
 
 

It is with great pleasure that we welcome Bo Fisker to Serman & Tipsmark. As of 1 September, Bo is our new Financial Manager and the latest addition to the office in Brønderslev. Originally, he is an accountant, and in his lastest job, he was a Group Finance Manager at the international company SBS in Pandrup.

The fact that Bo has experience from an international company fits perfectly with Serman & Tipsmark currently working on making our focus more international.

Bo lives with his wife and son in Brønderslev, and he will therefore be yet another local face around the office. He values a dynamic company and says that that is exactly what Serman & Tipsmark represents. Bo looks forward to supplying the financial part of Serman & Tipsmark and work closely together with the rest of the management group.   
It as very clear that Bo Fisker is the right match as Financial Manager at S&T as he has settled really well among great colleagues.

We look forward to the onward cooperation!

On Sunday, 26 August, we attended a great Grand Prix event at Jyllandsringen, which is a motorsport arena in Denmark. Serman & Tipsmark sponsored Team Staudt Racing that has just ranked up to the DTC class (Danish Thundersport Championship). We had a wonderful day with approximately 35 customers and 6 employees from Serman & Tipsmark.




The event lasted from 9 AM – 6 PM, and it was fantastic. Even though the weather has been typically Danish lately, we were lucky and the weather was great for a day outdoors. Besides the nice weather, we and our customers had really great seats on the platform. This meant that we could all feel the vibe of Jyllandsringen.

Throughout the day, we obviously watched a lot of racing. We also visited multiple pits of the different teams, so we could keep up with the race behind the scenes. On top of watching a lot of race, we also had great food: a classic, whole roast suckling pig.
We had a competition, which Jan Jensen from Pedershaab Hawkeye won. His prize was a ride in a Lamborghini Gallardo – in spirit of the entire event.

All in all, it was a really great day, where our customers had the chance to meet cross-functionally. In that way, they had the opportunity to become acquainted with industries they don’t work with on a daily basis.
 

At Serman & Tipsmark, we strive to provide the best service and the best systems for our customers. For us, that means high-quality work with the best components on the market. That is – among other things – why we collaborate with the global engineering company Parker Hannifin.

Parker has developed a non-welded flanged tube and piping system – Parflange F37. We use this pipe system in our productions. It makes it both more efficient and more secure to transfer pressure-carried fluids. We use the piping system for e.g. industrial, offshore and marine applications – it’s ideal for our high-pressure applications.

The F37 piping system has high mechanical stability and great sealing characteristics. The non-welded piping system ensures leak-free and fast assembly because we save time on welding. This means that we can supply our customers with our systems even faster.     

Stay connected and updated about Serman & Tipsmark – follow us on  LinkedIn here: https://www.linkedin.com/m/login/